Delfield Shelleymatic MF 31 User Manual

PROJECT

ITEM #

QUANTITY

APPROVAL

DATE

Built-in remote milk or beverage dispensers

Short form specifications

The exterior sides, bottom and top edge shall be 20-gauge

galvanized steel. 14-gauge exterior bottom applies to self

contained models only.

Inner liner shall be water tight and constructed of 22-gauge

stainless steel with a 1.00” (2.54cm) I.P.S. drain. Opening(s)

shall have throat liners constructed of high impact plastic.

Unit to be insulated with foamed-in-place polyurethane insu-

lation with a non-conductive breaker strip.

Each opening shall have an insulated, stainless steel folding

lid with aluminum liner, molded rubber edge and black plastic

handles.

Each self-leveling mechanism shall be field adjustable by add-

ing or removing stainless steel extension springs in the eleva-

tor housing inside the unit. The elevators shall be connected

by removable platform carriers constructed of 18-gauge

stainless steel.

Model MF-31

Refrigeration system (to provided by others) shall use HFC-

134a refrigerant. An expansion valve and copper tubing con-

nection to the remote refrigeration system shall be provided.

NOTE: Temperature and pressure controls are not provided

on remote models.

THE FOLLOWING APPLIES TO MODELS MF-2821, MF-31,

MF-44 AND MF-57 ONLY:

(6) anodized aluminum divider trays will be supplied per

opening. NOTE: See chart on back for milk storage capacity.

Optional Accessories & Modifications

•

Lid locking device

Wire baskets (not available on MF-2020)

Lexan^®covers

Special refrigerants (contact factory)